Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterCopperfield Chimney Cap & Crown in Coventry: What to Know First
If you own a Copperfield chimney cap or crown in Coventry and it’s started to rust, crack, or let water into your flue, we fix it. We’re an independent Copperfield service provider, not a factory warranty line, which means you’ll talk to a real person who has actually worked on Copperfield products in Tolland County homes. Most cap and crown jobs in Coventry take us half a day on site, and we’ll give you the price before any tool comes off the truck. Call (860) 743-7732 and Wendell or one of the crew will answer.
This page is for Coventry homeowners who have a Copperfield chimney product and want straight answers about cap replacement, crown repair, or a full custom cap job. No scare tactics, no mystery pricing. If it doesn’t need doing, we’ll tell you.
How Copperfield Products Fail - and How We Fix Them
Copperfield makes a solid product line, but we’ve been inside enough Coventry chimneys to know where they fail and why. The freeze-thaw cycle out here is harder on caps and crowns than anything the factory tests for. Here’s what we actually see:
- Copperfield stainless caps with galvanized mounting brackets. The cap itself holds up, but the bracket corrodes first, especially on the side facing the prevailing wind off the Willimantic River valley. We replace the bracket with stainless hardware before it drops the cap into the flue. This is the most common Copperfield cap failure we see in Coventry and most owners never notice the rust until the cap is loose.
- Crown hairline cracks on Copperfield multi-flue caps. Coventry winters average over two dozen freeze-thaw cycles each season, and a hairline crack opens up fast. Water gets in, freezes, widens the crack. We repair the crown with a flexible crown coat that moves with the temperature, then re-seat the cap so water runs off instead of pooling.
- Screen mesh clogging on Copperfield chimney caps. Copperfield uses a fine mesh to keep animals out, fine enough that creosote and the green pollen that comes through Coventry every spring can clog it in one season. When airflow drops, smoke backs up into the house. We clean it, and if the mesh was damaged by a bird or squirrel, we recommend a replacement screen rather than trying to patch it, because a torn patch just invites the next one in.
- Crown separation from the flue tile on older Copperfield installations. When the crown pulls away from the tile, the gap is small enough that water follows it down but too small to see from the ground. The first sign is usually water staining on the damper. We re-seal the joint, but if the crown itself has started to spall, we’ll tell you straight whether it’s a patch or a full crown rebuild.
- Copperfield custom cap drafts and wind noise. Some of the older Copperfield custom caps installed in the 1990s and early 2000s around Coventry have a taller profile that whistles in a stiff January wind. It’s more of an annoyance than a hazard, but we can retrofit a baffle or replace the cap with a properly sized unit that won’t howl when the wind hits 30 knots.
Our Copperfield Chimney Cap & Crown Process
Here’s what a Copperfield cap or crown job with us actually looks like, step by step:
- 1
You call, a person answers. No call center. We ask what you’re seeing, check where you are in Coventry, and set a time. If we’re running late, you’ll know before the window closes.
- 2
We get on the roof and look. Wendell or one of the crew will inspect the cap, the crown, and the top few feet of the flue. We take photos and video so you can see exactly what we’re seeing.
- 3
We explain the options in plain English. OEM Copperfield part, quality aftermarket, or repairable as-is. We’ll tell you which one makes sense for your situation and which ones don’t. The price is set then, before any work starts.
- 4
The repair or replacement happens that day. Most Copperfield cap replacements and crown repairs are half-day jobs. We bring the right parts, but if we find something unexpected inside the flue, we’ll show you the camera footage before suggesting anything extra.
- 5
We test the draft and check the seal. You get a smoke test before we leave to confirm everything is moving air the way it should.
- 6
You get the 90-Day Done Right Promise in writing. If anything about the work isn’t right, one call brings us back at no charge. That’s it. No fine print.
What Copperfield Chimney Cap & Crown Costs in Coventry
Here are the honest price ranges we see for Copperfield work in Coventry, as of this season:
- Standard Copperfield cap replacement: $325-$575, depending on flue size and whether it’s a single or multi-flue cap
- Custom Copperfield cap (odd-sized flue or specialty profile): $600-$950
- Crown repair with flexible crown coat: $250-$450
- Full crown rebuild (multi-flue or badly spalled): $750-$1,400
- Crown sealant touch-up (hairline cracks caught early): $150-$275
What moves the price is access, flue count, and whether the crown needs a patch or a full rebuild. Copperfield OEM parts cost more than quality aftermarket caps, and we’ll show you the difference before you decide. Every estimate is free, and we don’t add surprise line items when the job’s done. Call (860) 743-7732 for an exact quote.
Why Coventry Homeowners Call Top Hat Chimney for Copperfield Work
We’ve been working on chimneys in and around Coventry since 1999. Wendell Pike started Top Hat Chimney with a truck and a simple rule: tell people the truth about what their chimney needs and what it doesn’t. That’s why you’ll find his name and license number on the website, his face in the truck, and the 90-Day Done Right Promise stamped on every invoice. No rotating crew of strangers. The sweep who shows up is the person who will answer if you call back.
We service Copperfield products regularly, and when the right fix isn’t a Copperfield part, we work with DuraFlex, HeatShield, and Gelco so you’re not stuck with whatever the factory catalog has in stock. We’ll tell you when a quality aftermarket cap is the smarter buy and when it’s worth paying for OEM. Either way, the answer is based on what your chimney actually needs, not what’s easiest for us to sell. And when you’re out near the Nathan Hale Homestead on a cold December morning, you’ll understand why we do it that way.
FAQs
No. We’re an independent Copperfield service provider, which means we repair and replace Copperfield products without being tied to the manufacturer’s sales targets or warranty bureaucracy. If your cap or crown is still under factory warranty, we’ll help you figure out what the warranty actually covers and whether a warranty claim is worth the wait, or whether it’s faster and cheaper to just fix it right now.
Standard Copperfield caps are usually in our hands within a few days, and we can often have them installed within a week of the initial call. Custom caps take longer because they’re fabricated to your flue’s exact dimensions. Between the pattern work and the fabrication, allow two to three weeks. Most Coventry homeowners book cap replacements before burning season, which means faster turnaround and lower rush costs. Call (860) 743-7732 and we’ll give you a real timeline, not a vague promise.
Maybe not today. If the rust is surface-level and the cap is structurally solid, clean it, hit the rust spots with a high-temp rust converter, and check it again in the spring. If the rust has eaten through the frame or the mounting brackets are compromised, replace it before a stiff wind sends it into your neighbor’s yard. We’ll tell you which situation you’re in without trying to scare you into a sale.
Yes. Every cap installation, crown repair, or crown rebuild we do is covered by our 90-Day Done Right Promise in writing. If the work isn’t right, one call brings us back at no additional cost. That’s been our policy since 1999, and it doesn’t change based on the brand of cap on your chimney.
The only honest way to know is to get on the roof and look. Hairline cracks can be sealed and coated. A crown that’s spalling, pulling away from the flue tile, or crumbling at the edges needs a rebuild. We’ll show you the photos and the camera footage, explain what’s holding and what’s not, and give you a straight answer on which one your crown actually needs.
Yes. If you have a custom Copperfield cap on a multi-flue chimney and only one piece of it has failed, we can often fabricate a matching replacement section rather than replacing the entire cap. Bring us a photo and the flue measurements, and we’ll tell you what’s possible before you spend a dime. Call (860) 743-7732 for a free estimate.
Get a Straight Answer About Your Copperfield Cap or Crown in Coventry
If your Copperfield chimney cap is loose, rusted through, or letting water into your flue, call us. You’ll get a real person on the line, a straight answer about what’s wrong, and a price that won’t change when the crew shows up. We’ve been fixing chimneys in Coventry since 1999, and Wendell still answers the phone. Call (860) 743-7732 today and schedule your free estimate.
Written by Wendell Pike, Owner, Top Hat Chimney at Top Hat Chimney, serving Coventry and nearby areas.