Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Mansfield
A chimney cap and crown in Mansfield typically costs $340-$1,100 depending on whether we’re replacing a rusted cap, recoating a cracked crown, or fabricating a custom multi-flue cap for an older colonial. Most jobs take us under two hours once we’re on the roof, and we carry stock for Mansfield’s most common flue sizes so the Mansfield Chimney Cleaning & Sweep technician who shows up can usually finish same day. Call (860) 743-7732 and Wendell or one of his crew will give you a straight number before a single tool comes off the truck.
We’ve worked the roofs around Mansfield long enough to know which chimneys were built for 18th-century wood heat and which ones got a hasty rental conversion in 1987. The difference matters when you’re deciding between a $90 crown coating and a $600 full recrown. Ask anyone on your street.
Why Top Hat Chimney Is Mansfield’s Preferred Chimney Cap & Crown Company
Wendell Pike started Top Hat Chimney in 1999, and he’s been climbing onto Mansfield roofs since before half the student rentals on Hunting Lodge Road had working gutter systems. That’s not a line. It’s twenty-nine years of seeing what freeze-thaw does to an uncoated crown on a 1760s Federal farmhouse off Storrs Road, and what a missing cap on a shared rowhouse flue does to the unit next door.
We answer the phone ourselves. Not a call center, not a voicemail box. If you call at 2 a.m. because a squirrel just fell down your uncapped flue and is scrabbling behind the firebox, you’ll get a live person. It may well be Wendell. His name and license number are published, and you’ll run into him at the farmers market on Saturday. That’s the difference between a company that puts its name on the work and one that rotates in a stranger from three towns over.
Every job, including a simple cap replacement, gets the 90-Day Done Right Promise in writing. If the cap leaks, the crown cracks again, or the draft goes wrong within ninety days, one call brings the crew back at no charge. We also do free second opinions on any written estimate, and we knock $40 off any Chimney Repair in Mansfield over $200. Seniors and veterans always save 10%.
Our Chimney Cap & Crown Services in Mansfield
Cap Installation
A new cap on a Mansfield chimney does three jobs at once: keeps rain out, keeps animals out, and stops downdrafts. In Mansfield’s Storrs Road rental corridor, the third one matters most. When a neighboring unit’s wood stove pushes smoke into a shared stack, a properly sized cap with a strong draft shield is the difference between a clean fire and a living room full of smoke. We install standard single-flue caps, draft-increasing caps, and mesh screens sized to your flue tile as part of our Fireplace Services in Mansfield, and we’ll show you the camera footage before and after.

Cap Replacement
Rusted out caps are the most common call we get in Mansfield between October and January. The cap’s mesh screen rots first, then the hood, and suddenly you’ve got a squirrel nest in the flue or snowmelt running down the smoke chamber. If you’re in an older cape or ranch near campus that was converted to rentals, there’s a good chance the cap hasn’t been looked at since the last tenant signed a lease. We carry replacements for the brands we see most around here, so we usually don’t have to order and come back.

Crown Repair
A chimney crown is the concrete or mortar slab that sheds water off the top of the chimney stack. In Mansfield, freeze-thaw cycles do real damage: water gets into hairline cracks, freezes, expands, and spalls the crown apart by spring. On an uncoated crown on a mid-century house, you’ll see chunks of mortar in the gutter by March. We repair crowns by cleaning out the cracks, filling with a proper crown repair compound, and recoating so the whole surface sheds water instead of absorbing it.

Crown Coating
Crown coating is the least expensive way to buy years on a crown that’s cracked but still sound. We clean the crown, fill the cracks, and brush on a flexible waterproof membrane that moves with the freeze-thaw instead of fighting it. In Mansfield, where winters run long and snow sits on roofs for weeks, a good coating job is often the difference between a $200 repair and a $1,500 full recrown two years later.

Custom Cap
Older Mansfield houses, especially the 18th and early 19th-century colonials along Storrs Road, often have flue dimensions that don’t match a stock cap. A wide-throat fireplace built for cordwood in 1790 doesn’t fit a 13×13 cap from a catalog. We fabricate custom caps to match the flue tile and the house. The result sheds water like it should and draws like the original build intended.

Multi-Flue Cap
The student rental stock in Mansfield has a lot of shared and adjacent flues. Two fireplaces, two flues, one chimney stack, and a single cap that has to cover both without choking either one. A multi-flue cap also matters when one flue is active and the other is abandoned: an uncapped abandoned flue lets rain into the house and backdraft into the lower unit. We install multi-flue caps that cover both, with separate screening so one tenant’s fire never pushes smoke into the other’s living room.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Mansfield
Wendell and his crew work with Olympia Chimney, DuraFlex, and Gelco parts daily, and we keep stock on hand for the flue sizes we see most around Mansfield. That means a cap replacement on a colonial off Storrs Road or a recrown on a cape in Storrs Village doesn’t wait on a parts order. We also do chimney liner work, so if the camera shows a cracked clay tile behind that failed cap, we can talk you through the options without dragging in a second company. Our full Chimney Cap & Crown service covers repair and installation from the cap down to the smoke shelf.
One field note from our work on a 1790s Federal farmhouse off Storrs Road: the original wide-throat flue served two adjacent rental units, and the rusted cap was letting snowmelt pour straight down the smoke chamber. The clay tile liner was spalling, and cold air was backdrafting into the first-floor tenant’s firebox every time the second-floor tenant lit a fire. We replaced the failed cap with a custom multi-flue cap and coated the crown with HeatShield. The draft holds steady now, and the second-floor smoke stays out of the first-floor unit.
Common Chimney Cap & Crown Problems We See in Mansfield Homes
- Missing caps on shared rowhouse flues. In the rental corridors along Hunting Lodge Road and Storrs Road, we routinely find one side of a shared stack capped and the other side bare. The uncapped side lets rain and squirrels into both units, and a neighbor’s wood stove backdrafts into the uncapped flue.
- Freeze-thaw crown failure on older homes. Mansfield’s inland elevation means more snow and more heating degree days than most of central Connecticut. A small crack in an uncoated crown becomes a spalled mess by April, and the water gets behind the flashing and into shared walls.
- Rusted cap screens on student rentals. Landlords defer cap inspection between leases. The mesh screen rusts out, squirrels nest in the flue over the summer, and the first tenant fire in October smokes out the whole unit.
- Green wood creosote in shared stacks. Students burning cheap, wet firewood in a Storrs Village rental can push third-degree creosote into a shared stack. If the cap on your side is missing, that tar glaze pulls moisture up into your flue liner, and next season’s firing becomes a chimney fire risk.
Pricing for Chimney Cap & Crown in Mansfield, CT
Here’s what Mansfield homeowners should expect to pay, based on what we actually quote around here. A standard single-flue cap installation runs $180-$340. A cap replacement with a rusted-out screen, including hauling away the old cap, runs $200-$400. Crown coating, which includes crack filling and a waterproof membrane, runs $250-$450 for a standard single-flue chimney. A full crown repair with repointing runs $450-$900. Custom caps start at $500 and go up based on flue dimensions, and a multi-flue cap for a shared or adjacent setup starts around $600.
What moves the price: roof pitch and access, the number of flues, and whether the underlying crown needs structural work or just coating. We give you the number before we start, and the invoice matches the quote. Call (860) 743-7732 for a free estimate. No trip charge inside the county.
We Also Serve Cities Near Mansfield
For chimney cap and crown work in Chimney Cap & Crown in Mansfield‘s surrounding towns, we regularly run crews to Coventry, Glastonbury, East Hartford, and Manchester. The housing stock changes, the freeze-thaw stays the same, and the pricing stays honest.
Serving Mansfield, CT - Our Local Coverage Area
We’re based in the Mansfield area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Mansfield
Money is the short answer, but it’s not the whole one. Hunting Lodge Road and the other Storrs rental corridors turn over every one to two years, and the cap is the last thing on a landlord’s list between cleaning out a unit and signing the next lease. The cap screen rusts out, the crown cracks, and nobody hears about it until a new tenant’s first fire smokes out the living room in October. That’s also when the bill is highest. If you’re a landlord in the Storrs area, have the cap and crown checked before the next lease starts. Call (860) 743-7732 and we’ll schedule it between tenants.
Yes, and we see it all the time in Mansfield’s shared-flue rowhouses. When two flues share a single stack and one side is uncapped, the open flue acts like a chimney even when nothing is burning. Cold air falls into your firebox, and when the neighbor lights a fire, the pressure in the shared stack pushes smoke and gases toward the path of least resistance. That’s your uncapped flue. The fix is a proper cap on both sides, and in some cases a multi-flue cap that handles both flues as one system. Call (860) 743-7732 for a camera inspection if you’re getting smoke smell from a cold fireplace.
They usually do. The big colonial fireplaces along Storrs Road were built before standardized flue tiles, so the opening at the top is often wider and shallower than modern off-the-shelf caps are designed for. A stock cap leaves gaps, which defeats the point. We’ve done enough of these to know when a stock unit will work and when a custom fabrication is the only right answer. Expect a custom cap on an original wide-throat flue to start around $500 and go up from there.
Crown coating runs $250-$450, while a full repoint runs $450-$900, because coating works on a crown that’s cracked but still structurally intact. We clean the surface, fill the cracks, and brush on a flexible membrane that moves with freeze-thaw. It holds through a Mansfield winter if the crown underneath is sound. If the mortar is spalling and dropping chunks into the gutter, coating won’t save it. We’ll tell you which one you need, and we’ll show you the camera footage to prove it. Free estimates: (860) 743-7732.
Usually three things, in this order: a rusted or missing cap, a cracked or uncoated crown, and a creosote load that ranges from heavy to glazed. Two years of students burning whatever wood is cheap or wet produces a lot of creosote, and the uncapped flue pulls moisture into it, which makes it worse. If the chimney serves a shared stack, you’ll also see cross-contamination where the neighbor’s flue gases have been pushing into the uncapped side. The inspection gives you a camera record and a plain-English verdict, every time. Schedule one at (860) 743-7732.
Written by Wendell Pike, Owner at Top Hat Chimney, serving Mansfield and surrounding towns since 1999.





Before
After
Before
After
Before
After